uv gel,glass gel 207,3206 adhesive glue

uv gel glass gel 207,3206 adhesive glue 1.Enhanced formulation flexibility. 2.The transparent is obviously MOQ:1kg uv gel glass gel 207,3206 adhesive gelMOQ:1KGThe product is uv curable glue that cures in 200 ~ 400nm wavelength ultraviolet ray. It uses in the glass and the glass cementation.It is suitable specially for the glass handicraft cementation ,the glass dining table, the glass coffee table, the art glass,the sanitary glass, the glass cases, and such as glass products industry.Feature· Enhanced formulation flexibility, when uses in large area of glass, the bonding layer does not blanch and it can not afford to color patterns or white patterns.· Anti-aging well, in the long term under conditions of force it is able to maintain high strength and the intensity is not reduced.· The transparent is obviously better than general UV gel, after cured the product remain unchanged yellow and non-whitening.· Environmental, non-toxic, low odor and low corrosion.Specifications

Test Project	207	3206
appearance	clear liquid	clear liquid
mpa.sViscosity	5525	10025
Positioning time	15	12
mj/cm²Curing Energy	1500	1500
MPaTensile Strength	14the glass and the glass cementation	20the glass and the glass cementation
DHardness	50	67
Featuresand Uses	Low-viscosity, low odor, Is suitable between large area of flat glass bonding	Low viscosity, high strength adhesive for the glass facade

The positioning time of the above that is under glass and glass bonding in 40-watt Philips intensity of 7.5 mW/cm2 uv light condition measured.the way of usingFirst, clean the glass surface, dry the glass surface, and wait for the fully dried before dispensing.Second, the glue uniform point in a glass surface, and the other glass conducts fit gently on the glue, forced to squeeze the glass and glue leveling bubble discharge, determine the position of bonding glue coverage and fixed-site well.Third, use a cloth or paper towel to wipe around the overflow gel of the glass. Before this step, try to not let the glue exposure to ultraviolet light. Do not use with a damp cloth, wet paper, liquid (such as glass, water, water, alcohol, acetone and other solvents) to scrub the glass surrounding Resin before the glue completely cured.Fourth, use a wavelength of 365 nm ultraviolet light to carve, until the layer has fully cured. Ultraviolet light irradiation is as close as possible to accelerate the curing speed glue.Fifth, after ultraviolet radiation curing, you can resin the gel of the glass around curettage.Notes1. The ideal thickness of bonding layer is 0.01-0.05mm, if too thin or too thick, it will be affected to the adhesion properties.2. Ensure that the adhesive layer to absorb enough ultraviolet energy in order to achieve the best curing effect, or possibly to influence adhesion layer.3. Not back and forth movement of the glass, otherwise easily led to layer whitish and bonding strength decreased.4. Residual glue can not be pumped back into the original packaging, should be stored at sealed dark room temperature and without rendering children.StorageStorage in the dark, sealing, ventilation, cool conditions, the ideal storage temperature is 8-28 .Duration: 1 yearPackaging250 g / bottle, 1 kg / bottle, 20 kg / barrel

uv gel,glass gel 207,3206 adhesive glue