Dongyuan Ransheng Chemical Co., Ltd.
Main products:Uv gel,Gel polish,one step gel,color gel,nail gel
Products
Contact Us
  • Contact Person : Ms. ure Fui
  • Company Name : Dongyuan Ransheng Chemical Co., Ltd.
  • Tel : 86-20-85654203
  • Fax : 86-20-85654536
  • Address : Guangdong,Heyuan,Xiantang Industry Zone, Dongyuan County
  • Country/Region : China
  • Zip : 510655

UV RESIN 4050

UV RESIN 4050
Product Detailed
Related Categories:Adhesives & Sealants
Related Product Searches:UV RESIN 4050,High Quality,uv resin, uv gel,4050,4051,4052
uv adhesive gel,LCD sealed, fixed UV glue have excellent adhesive strength for LCD pin, LCD glass panels. MOQ:1Kg

uv adhesive gel ,LCD fixed UV glue 4050

MOQ: 1KG

The product is uv curable glue that cures in 200 ~ 400nm wavelength ultraviolet ray. 4050,4051 are mainly used for LCD sealing and pin fixation, 4052 is used for the LCD pin fixation.

Feature

 It has an excellent adhesive strength effect on  the LCD pin, LCD glass panels.

·Toughness formula, low shrinkage after curing

.transparency highly, curing deeply and drying fast.

 Environmental, non-toxic,  do not stimulate the skin.

Specifications

test project

4050

4051

4052

appearance

clear liquid

clear liquid

clear liquid

Viscosity

mpa.s

15000

10000

6000

Curing Energy

mj/cm2

1500

1500

1500

Tensile Strength

N

>25

>25

>30

Hardness(D)

78

80

75

absorption%

1.0

1.0

1.5

feature

Resistance to boiling effect is good for the sealing pin and sealing

Curing speed, viscosity, moderate, and the sealing for the sealing pin

Low viscosity, high strength, dedicated pin closure

 The positioning time of the above that is under glass and glass bonding in 40-watt Philips intensity of 7.5 mW/cm2 uv light condition measured. 

the way of using

First,clean the surface of the material.

Second,The glue uniform point (down) in the surface

Third,With a wavelength of 365 nm ultraviolet light irradiation. Ultraviolet light irradiation as possible as close to the glue that can speed up carving.

Fourth,Tears The PC or PET from the metal mold, the layer completely Stripped and sticked on the surface of the PC or PET . If there is difficult or impossible to Strip film, it is considered that spray a layer of release liquid at metal surface and it can be an effective solution to strip the difficult problem.

Fifth,if the Layer is not completely cured at this time and can continue to exposure to ultraviolet until the layer has been fully carved.

Notes

1. The ideal thickness of bonding layer is 0.01-0.05mm, if too thin or too thick, it will be affected to the adhesion properties.

2. Ensure that the adhesive layer to absorb enough ultraviolet energy in order to achieve the best curing effect, or possibly to influence adhesion layer.

3. Not back and forth movement of the glass, otherwise easily led to layer whitish and bonding strength decreased.

4. Residual glue can not be pumped back into the original packaging, should be stored at sealed dark room temperature and without rendering children.

Storage

Storage in the dark, sealing, ventilation, cool conditions, the ideal storage temperature is 8-28 .

Duration: 1 year

Packaging

 1 kg / bottle, 20kg / barrel

UV RESIN 4050



Copyright Notice @ 2008-2012 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.